How to Make a Ps3 Controller Feel Brand New Again

Download Article

Download Article

This wikiHow teaches how to connect your PS3 controller wirelessly to your PS3, too every bit how to employ information technology on a Windows or Mac computer. It'southward also possible to use a PS3 controller with Android, though y'all'll demand to root your phone or tablet to do then. When connecting a PS3 controller to anything, it is crucial that you utilise a PS3 controller fabricated by Sony; any third-party controllers are liable to fail or glitch out.

1. 1

   Turn on the PlayStation 3. Press the Power button on the front of the console. When connecting a new controller, the PS3 cannot be in Standby style.

2. 2

   Connect the controller'south charging cable to the controller. You'll observe the charging port for the cable, which is a mini-USB cablevision, in the front of the controller's housing (between the triggers).

   Advertisement

3. 3

   Connect the other stop of the cablevision to the PS3. The other end of the charging cable should plug into a USB port on the front of the PS3.

   • Depending on your PlayStation model, you'll notice either ii or 4 USB ports here.

4. 4

   Turn on the controller. Press the PlayStation button in the center of the controller. The lights on the front terminate of the controller will begin blinking.

5. 5

   Await for the controller lights to end blinking. Once a single light is on and not blinking, your controller is synced with the PS3.

   • The light that is on indicates which controller you lot are using (P1, P2, etc.).

6. 6

   Disconnect the USB cablevision from the controller. Your controller should now be connected to the PS3 wirelessly.

   • Wireless functionality is only bachelor on official Sony DualShock 3 controllers. On unofficial controllers, you'll need to leave the cablevision plugged in.

7. 7

   Charge the controller if it doesn't stay on. If your controller turns off after unplugging it, it may be out of accuse. Proceed it plugged in for a few hours with the PS3 on to charge the battery.

8. 8

   Reset the controller if it however won't sync. If you lot however can't go your controller to sync with the PS3, you may need to reset it. To do and so:

   • Turn over the controller and locate the Reset button. You can notice it forth the top of the behind, near the L2 push.
   • Utilize a bent paperclip to press and concur the Reset button. You should be able to feel it click.
   • Concord the Reset push for at least two seconds, so remove the paperclip.
   • Endeavour connecting and syncing the controller again.

   Advertisement

1. 1

   Make sure that you have a Sony-certified controller and charging cable. The program that you'll use to connect your PlayStation iii controller to your computer but works reliably with Sony DualShock three controllers that are connected to the computer via a PS3 controller charging cable.

   • While you may be able to get 3rd-party controllers to work (or Sony controllers to work wirelessly), the just reliable way of connecting a PlayStation iii controller to your Windows computer is with the aforementioned Sony-certified controller and cablevision.

2. 2

   Unplug your PlayStation iii. If you have a PS3 within range of your controller, unplug it from the wall to preclude the controller from accidentally connecting to it.

3. 3

   Reset your controller. Using a bent paperclip, press the recessed Reset push button that'due south on the bottom of your controller. This will prevent the controller from failing to connect due to past pairings.

4. four

   Plow on your controller. Press the PlayStation button in the middle of the controller to do so. Its lights volition begin blinking.

   • Due to a glitch on some Windows computers, you'll need to turn on your controller before connecting it to your computer.

5. 5

   Connect your controller to your calculator. Plug the small terminate of the charging cablevision into your PS3 controller, then plug the other end into ane of your estimator'due south USB ports.

6. vi

   Download the SCP Toolkit. SCP Toolkit is a programme that allows Windows to use a PlayStation 3 controller.

   • Go to the SCP Toolkit website in a browser.
   • Click ScpToolkit_Setup.exe below the "Avails" heading.
   • Look for the file to finish downloading.

7. seven

   Install the SCP Toolkit program. To do then:

   • Double-click the setup file.
   • Click Yes when prompted.
   • Follow the on-screen instructions until you can click Install, then click information technology.
     • You may have to click several different Install buttons.
   • If prompted to install prerequisites, click Next until the prerequisites begin to install.
   • Click Finish when prompted.

8. eight

   Open the "SCPToolkitDriver" Installer programme. Double-click this app icon on your desktop to open it.

9. nine

   Disable unwanted options. Uncheck both the "Install DualShock4 Controller" box and the "Bluetooth" box, as well every bit any other options in the window that you don't want to use.

   • If you're unfamiliar with the other checked boxes not listed hither, information technology's best to go out them checked.

10. x

    Click the "Choose DualShock 3 Controllers to Install" box. You lot'll find this on the correct side of the window.

11. 11

    Cheque the "Wireless Controller" option. Y'all'll come across a list of all devices attached to your figurer (e.m., keyboards, mouses, webcams, etc.). Your PS3 controller is the option marked "Wireless Controller (Interface [number])" hither.

    • The [number] section pertains to the USB port that your controller is using.

12. 12

    Click Install . Information technology's on the right side of the window. Doing and so will prompt SCP Toolkit to brainstorm installing your controller's drivers.

    • Once the installation is complete, you'll hear a confirmation noise, at which point you lot should be able to use your PlayStation iii controller with whatever compatible game.

    Advertisement

1. one

   Power downward and unplug your PS3. If you lot have a PS3 for which you would normally use your controller, turn it off and unplug it to forbid accidentally turning information technology on while you pair the controller with your Mac.

2. 2

   Reset your controller. Using a bent paperclip, press the recessed Reset button that'due south on the bottom of your controller. This will prevent the controller from running into problems left over from previous pairings.

   • This pace is optional, but highly recommended.

3. 3

   Open up the Apple carte . Click the Apple tree logo in the meridian-left corner of the screen. A drop-down menu volition appear.

4. iv

   Click Organization Preferences… . It's in the driblet-down bill of fare. This volition open the System Preferences window.

5. 5

   Click Bluetooth . It's the Bluetooth icon

   in the middle of the System Preferences bill of fare.

   • If you don't see this option, click the ⋮⋮⋮⋮ button to return to the principal System Preferences bill of fare.

6. 6

   Click Plow Bluetooth On . This button is on the left side of the page. Doing so enables your Mac's Bluetooth.

   • If this button reads Plow Bluetooth Off instead, Bluetooth is already enabled.

7. 7

   Connect the PS3 controller to your Mac. Adhere the small end of the charger cable that came with your PS3 controller to the controller's charging port, then plug the other terminate into your Mac'south USB port.

   • If your Mac uses USB-C ports (ovals) instead of USB 3.0 ports (rectangles), you'll need to buy a USB 3.0 to USB-C adapter for your Mac before you can do this. You can detect them on Amazon and in tech department stores.

8. 8

   Let the controller charge if necessary. If the controller hasn't been charged for a while, you lot may want to let information technology charge for most thirty minutes before proceeding with setting up the Bluetooth connexion.

9. nine

   Printing and agree the PlayStation button for 2 seconds. It's in the center of the controller. Doing so will prompt the lights on the top of the controller to brainstorm flashing.

10. 10

    Unplug the controller and wait for it to sync. The PS3 controller will announced in the list every bit "Connected" after a few seconds.

11. 11

    Enter 0000 as the passcode if prompted. If your Mac prompts yous for the device's passcode, type 0000 and so click Pair. This normally isn't required on newer Macs.

12. 12

    Set up up your controller in-game. Now that the PS3 controller is connected to your reckoner via Bluetooth, you tin use it in any game that supports gamepads. You may take to manually set up the controller buttons for game functions; this varies from game to game.

13. xiii

    Finished.

    Advert

Add New Question

• Question

  Will a third party PS3 controller sync with a PC?

  

  Yes, information technology will.

• Question

  I lost the USB to a controller without a charger port. How do I connect information technology to my PS3?

  

  Printing the reset and PS button for 3 seconds. And accept the PS3 off for information technology to work.

• Question

  Can I sync my PS3 controller to my PS3 without the cable?

  

  On the back of your controller there should exist a minor hole on the upper part closer to the side that contains the D-pad. This hole contains a Reset push button that can be depressed with any long thin detail such as a fork prong or a small screwdriver. This should cause the controller to search for nearby PlayStations to sync with.

• Question

  Are there different wireless controllers for different regions?

  

  No, the controllers are not region-locked.

• Question

  Why doesn't my controller sync after a reset?

  

  Information technology should but make sure that your remote is plugged into the PS3 with the USB cablevision or it won't piece of work.

• Question

  How practice I sync my controller when a USB cablevision doesn't work?

  

  Reset the controller. Plug it back in.

• Question

  What do I do when I can't sync it considering I don't take a cord?

  

  You take to purchase the cord or you accept to take the original controller that came with the PS3.

• Question

  How exercise I register my new rapid wireless control to my PS3?

  

  Utilize the plug in via USB and select the middle dwelling house button, allow a few seconds for it to register, and you are ready to play.

• Question

  How do you lot connect a ps3 controller to an Android phone or tablet?

  

  You cannot do that, due to the incompatibility of the two softwares.

• Question

  Tin can I sync a third party remote to a PS3?

  

  To use a PS3 controller with a tablet, you'll need an OTG cable that supports your device. Connect your OTG cable to your telephone or tablet and connect the appropriate USB cable to your PS3 controller to navigate effectually your phone or tablet.

Inquire a Question

200 characters left

Include your electronic mail accost to go a bulletin when this question is answered.

Submit

Advertizement

• Updating your PlayStation three can fix some connection issues for your controller.

• If your outset few attempts to connect your PlayStation 3 controller to your console or computer don't work, try using a different (however Sony) PlayStation 3 controller. If a dissimilar controller works, your first controller is probably broken.

Advertisement

• Connecting a PlayStation three controller to a Windows computer tin can be an unreliable procedure due to Microsoft's aversion to Sony products.

Advertisement

About This Article

Thanks to all authors for creating a page that has been read 1,013,710 times.

Did this article help you lot?

liddellhatily.blogspot.com

Source: https://www.wikihow.com/Sync-a-PS3-Controller

Share this post